carriage stop thimble part one, order of operations and calculating the ideal diameter for the knurl
Published 10 years ago • 14K plays • Length 14:49Download video MP4
Download video MP3
Similar videos
-
32:28
carriage stop thimble part two, turning and knurling
-
36:57
carriage stop spindle part one, turning the diameter and cutting the thread
-
15:25
carriage stop thimble part four, stamping the numbers
-
37:48
carriage stop thimble part three, using the dividing head to cut the divisions
-
27:39
use of the fly cutter on the milling machine
-
4:40
center a rotary table in under a minute without an indicator
-
23:58
clamp knurling tool, mounting bracket and back plate, part two
-
33:36
carriage stop clamp part one, sawing the stock and squaring up the part
-
37:00
carriage stop body part one, sawing and squaring the stock
-
33:21
carriage stop body part four, milling the radii
-
39:24
carriage stop clamp bolts, machining the head and heat treating
-
8:27
dial carriage stop
-
18:27
carriage stop body part three, drilling the holes
-
11:34
carriage stop clamp part two, drilling the holes and milling the notch
-
3:45
easy calculations for knurling
-
8:18
clamp knurling tool body, introduction
-
24:36
clamp knurling tool, body, four ways to machine the outer contour
-
15:36
micrometer carriage stop, final assembly and demonstration