i boosted single cells of my battery... and learned from this mistake.
Published 3 years ago • 21K plays • Length 21:06Download video MP4
Download video MP3
Similar videos
-
33:20
lifepo4 and absorption. what i learned from my previous mistakes...
-
12:13
why compression will not extend battery life (something else kills your batteries).
-
20:39
lithium cells in float charge. will it destroy your battery?
-
13:40
jk bms soc drift - how to (not) calibrate the current sensor and will it actually help?
-
32:44
yixiang batterie consistency test and how to identify problem cells. wait! have we just found some?
-
17:24
busting the 20%-80% soc myth for lifepo4 batteries.
-
10:05
can single lifepo4 cells 26650 start a car..??? (testing)
-
8:31
why are people not buying raw lifepo4 cells?
-
13:30
assembling eve 280ah lifepo4 batteries into 12.8v 560ah modules
-
14:45
parallel battery strings - worst solution ever?
-
17:47
this qucc bms does not protect my battery! am i right?
-
24:54
final installation of the battery 2.0 with 44kwh - and i discovered this! 😱
-
21:20
i removed the spray foam and replaced it with this! sealing the battery room once and for all!
-
31:11
testing the 10.000 cycle hithium 280ah batteries. did i just get scammed??
-
18:48
setting shunt before the bms a bad idea? here is why i think this is good! #buildthebattery.2
-
16:30
first battery charge. i needed to do this!
-
12:58
balance start voltage for lifepo4 explained. why you should not start too early... 🔋⚡
-
29:59
the yixiang diy box with eve lf280k cells tested! 'strange' voltage and capacity check!
-
17:47
do this and you don't need a bms 😉
-
15:58
ir camera finds weak battery cells! could soldering these battery connections be a better solution?
-
21:33
the battery box 2.0!? or what shall we do with all these new cells?
-
1:00
he made a trick in the atm #shorts