printnc drilling (close up)
Published 3 years ago • 2.5K plays • Length 1:14
Download video MP4
Download video MP3
Similar videos
-
12:38
printnc: measuring, cutting, drilling
-
0:32
fixrturn - tried interrupted cutting by round insert.
-
1:01
printnc center finding with dig3d touch probe
-
8:50
luddis printnc
-
15:27
printnc-mini update and z axis overview
-
0:41
printnc milling aluminum
-
3:15
printnc drill and tap guides
-
0:10
pi global camera 200 shutter 55 fps drilling steel with printnc 3.175mm drill 91mm/min feed 3600 rpm
-
1:40
printnc drilling 5mm 2 flute, 9k rpm, 250mm/min, 0.75mm peck, 3mm partial retract, 24mm total depth.
-
0:52
printnc manual tool change tool length offset using linuxcnc (5x speed)
-
1:27
reasonable speed for 1/8 in compression endmill, printnc
-
6:07
60 minutes of aluminum milling on the printnc in 6 minutes.
-
0:56
printnc first aluminum cuts
-
0:30
printnc bore op: 0.75mm step down/rev, 22krpm, 1800mm/min feed, 6mm single flute in 6.5mm hole.
-
0:19
first cuts in aluminum! #printnc
-
1:00
unboxing stepcraft m.1400 cnc machine
-
0:22
printnc partial retract for deep drilling, 9k rpm, 250mm/min feed, 0.5mm stepdown, 5mm retract.
-
0:59
printnc: 67cm³/min mrr in aluminium with 6mm end mill
Clip.africa.com - Privacy-policy